Talk to a Texture Specialist: +1-800-555-0195 · Mon–Fri 8am–5pm MT WDMA I.S.6A · ENERGY STAR Partner · FSC · GREENGUARD Gold
Woodgrain journal feature imagery

Woodgrain Journal

Fypon Siding Problems in Sussex and Mequon: What the Callbacks Actually Reveal

By Akiko Fujimori

A quality manager's breakdown of why PVC trim failures in southeast Wisconsin usually trace back to expansion allowance, installation details, and vague specs — not the material — plus the six-point check used before any package ships.

Last month I took the call I take every spring. Contractor on the other end, photos already in my inbox: door surrounds on a job in Mequon that wrapped in October, and by the second week of April the miters had opened up wide enough to show daylight. He wanted to know what was wrong with the product.

Here's the part that doesn't make it into his version of the story. In roughly four out of five of these calls, the material comes back from the lab within spec. The failure is somewhere else, and it's almost always in the same three places.

What follows is the order I actually walk through when a job comes back — not the sales pitch, the diagnostic.

What the complaint sounds like

The surface complaint is always some version of “PVC is supposed to be maintenance-free. Then why is it splitting inside two seasons?”

Then it turns to money. “We got undercut by 30% on a trim package and the homeowner couldn't tell the difference.”

Both complaints sit on the same assumption: the material is a commodity and the only real variable is price. In a lot of the jobs I've reviewed, that assumption is precisely what caused the problem.

It's tempting to think you can just compare quotes line by line. But two trim packages with identical-sounding line items can produce very different buildings, because the things that fail are usually not on the quote at all.

Why the same three things fail on southeast Wisconsin jobs

I write about Sussex and Mequon specifically because I see those jobs come back more often than jobs in milder climates, and it took me an embarrassingly long time to connect the dots. It isn't the material. It's the temperature swing, the way it gets installed, and the vagueness of what was written down.

The material moves more than anyone budgets for

Rigid PVC expands and contracts with temperature. Depending on the formulation, figure roughly 3 to 4 × 10⁻⁵ inches per inch per degree Fahrenheit — check the technical data sheet for the specific profile, because those numbers genuinely differ between manufacturers and between colors.

What that means in practice: a 12-foot run installed on a 38°F October morning wants to grow something like a quarter inch — maybe a little more, depending on sun exposure and color — by the time it's baking at 120°F in July. If the joints were butted tight because “that's how we do wood,” something has to give. Usually it's the caulk line.

That's the first oversimplification I hear, over and over: “PVC doesn't move.” It moves less than wood where moisture is concerned. Thermally it moves plenty, and in Wisconsin the annual swing covers about 100 degrees.

It gets installed like wood, on walls that aren't wood anymore

Wood wants tight joints and nails you can drive straight through. PVC wants slotted holes, fasteners that can slide, and a deliberate gap at the ends so it has somewhere to go. It also wants fasteners that don't rust — stainless or heavily galvanized, not the electro-galvanized framing nails sitting in the truck bed.

Second layer of the same problem: the wall behind the trim isn't wood either. Tighter energy codes mean an inch or two of exterior foam is now standard on new construction. Trim gets fastened through that foam, or to nailing that passes through it, and it moves with the season differently than the sheathing does. The install detail, meanwhile, is the same one from 1998 because nobody redrew it.

None of this is exotic. All of it gets skipped when the crew has done 200 wood houses and this is their first PVC package.

I have mixed feelings about blaming installers, honestly. On one hand, the details are in the product literature and they are not hard to follow. On the other, roughly half the drawings I receive don't specify fastener spacing at all — so what exactly is the crew supposed to guess from?

The spec is vague, so the cheapest interpretation wins

Here's the one that actually costs the most money, and it starts before anyone touches a saw.

When a spec reads “PVC trim, profile to match architect's drawing,” you've left thickness, cell class, fastener type, joint treatment, and substrate prep completely open. The bidder who interprets every one of those questions in the cheapest possible way wins the job, and the building that gets built has almost nothing in common with the one you thought you were buying.

People searching for “Fypon siding” in Sussex or Mequon are almost always looking for trim, fascia, column wraps, and door surrounds — not wall cladding. That distinction matters, because trim lives in a harsher spot than field siding does. A fascia board catches sun on one face and ice on the other across the same year. That's a different duty cycle, and the spec should say so out loud.

Batch consistency is a real supplier problem in this industry, and I'd be lying if I told you it never happened on my watch. But it's not the first thing I check anymore. The first thing I check is whether the project ever wrote down what “good” meant.

What a callback actually costs

The bill is bigger than the repair. A two-person crew rolling out for a half-day fix runs $450–$600 before materials (based on our own 2024 service records; verify current rates with your own subs). Add trim, caulk, touch-up paint, and the fact that the crew was supposed to be somewhere else that day.

On the Mequon job I mentioned at the top, the rework came to a little over $1,100 once the return trip was counted. The homeowner never cared about the number. What stuck with her was that the “finished” work wasn't finished.

That's the piece that never shows up on a bid comparison. The upside of the cheap quote was $900 saved. The risk was a first-year callback, a homeowner writing a review, and a referral she'll never make. I keep asking the same question about that trade: is $900 worth losing the next two houses on the street?

I've watched it go the other way too. A contractor paid a premium for a Fypon package on a Sussex project and the install still failed, because nobody checked substrate flatness before the trim went up. The premium bought nothing. That one bothered me for months.

What I check before a package ships

Six lines. Nothing on the list is clever.

  • Thermal expansion allowance written into the shop drawings, not left to the crew's judgment
  • Fastener type and spacing specified by profile — not “per manufacturer,” which is the phrase that starts arguments later
  • Joint gaps and joint treatment called out at every run length
  • Substrate flatness verified before trim goes up, especially over foam
  • Delivery-day temperature noted on the job sheet, so nobody installs tight on a cold morning
  • One physical sample of the actual profile and color on site before the full order ships

That's it. The reason every line is on the list is that each one has cost me something over the past four years.

And even with the list in place, I second-guess myself every time a cold snap comes through. Did the crew actually leave the gap? Did the fasteners get swapped when the boxes ran short? You don't fully relax until the second winter has passed.

The material will do what its data sheet says it will do. The outcome depends on whether the project wrote down what it wanted and whether anyone checked. Buy on the quote alone, and you'll eventually be the person asking why your maintenance-free product needs maintenance.

More from the journal

How to Choose the Right Meva Formwork System: A Quality Inspector's Decision Guide

A quality/brand compliance manager with over four years of experience reviewing construction deliverables breaks down which Meva formwork system fits which project type—and why the cheapest panel rarely delivers the lowest total cost. Covers Meva Lite, Meva Imperial, Meva panels, and the ancillary items most buying guides ignore.